Star Micronics XR-1520, XR-1020 manual Font menu, Character menu

•Auto On-Line

Set the status just after loaded the paper into the printer.

When the Auto-Online is set [*ENABLED], the printer automatically goes on-line.

When it is set [DISABLED], you must press the 1 ON LINE I button to set on-line after load the paper.

•STROBE timing

This switch controls the timing of the interface.

Most computers can communicate with the Normal timing, as the factory-

setting, [*NORMAL].

.. If you were not possible to communicate with your computer to the printer, set this switch to [REVERSE].

Font menu

The Font menu allows you to set two parameters concerning fonts which will be automatically selected whenever you turn on the printer.

•Zero style

This menu tells the printer how to print zero’s.

When the [*NORMAL] is selected, the printer prints the normal zero; when it is [SLASHED], the slash zero (which is often used in draft mode to prevent any possible confusion with the letter “0”).

•NLQ Font

.	There are many font styles for NLQ print mode. You can select one of them
	as the power-on default by setting this switch.
	NOTE:Since there are many fonts you can select, the [OTHER] option
	indicates to select other options on the next line.

Character menu

The Character menu allows you to select the character set which will be printed.

• Standard Character Table

If you selected Standard mode, you can set either italic or graphic characters.

When you select the [ITALIC] characters, the character table is the same as the Epson printers.

When you select the [*GRAPHICS] characters, in place of italics you will get the graphic characters, international characters, and mathematical symbols of IBM character set #2.

59