Star Micronics XR-1020, XR-1520 Set horizontal tab stops, Set horizontal tab stop every n columns

Set horizontal tab stops

Mode	ASCII	Decimal	Hexadecimal
Both	&SC> ‘9” nl	n2 .... <o> 27 68 nl n2 ~~ 0	10 44 nl d ~. 00

Cancels all current horizontal tab stops and sets new tab stops at columns nl, n2, etc. in the current character pitch (pica pitch if proportional spacing is currently selected), where nl, n2, etc. are numbers between 1 and 255. The maximum number of horizontal tab stops allowed is 32 in Standard mode and 64 in IBM mode. The tab stops must be specified in ascending order; any violation of ascending order terminates the tab stop list. Standard tennination is by the <o> control code. To clear ah tab stops, specify &SO “D” Co>.

Set horizontal tab stop every n columns

Mode	ASCII			Decimal			Hexadecimal
Std.	&SC>	“err “0’	n	27 101	48	n	106530	n
	cESC>	"e" cO>	n	27 101	0	n	106500	n

Cancels all current horizontal tab stops and sets new tab stops every n columns, where n is between 1 and 127.

Reset all tab stops

Mode	ASCII		Decimal	Hexadecimal
IBM	<Esc>	“R”	27 82	10 52
	Resets the horizontal tab stops to their power-up values in which a
	tab stop is set every 8 column		starting at column	9. Also clears all	-
	vertical	tab stops.			-

Horizontal tab

Mode	ASCII	Decimal	Hexadecimal
Both	dfn	9	09

Moves the print position to the next horizontal tab stop. Ignored if there is no next horizontal tab stop in the current line. Note that when underlining is selected, spaces skipped by horizontal tabulation are not underlined.

88