Star Micronics XR-1520, XR-1020 manual Print quadruple-densitygraphics, Select graphics mode

Print quadruple-densitygraphics

Mode	ASCII		Decimal			Hexadecimal
L	cESC> ‘7” nl	n2	27	90 nl	n2	10	5A nl	n2
Both	ml	m2	...	ml	m2	...	ml	m2 ...
‘L..	Prints bit-image graphics at 240 dots per inch horizontally (maxi-
6%.	mum 1920 dots wide for normal carriage printer, 3264 dots for wide
	carriageprinter), skippingeveryseconddotinthe					horizontaldirection.
.	See <ESC> “K’ for other information.

i. Select graphics mode

cMode ASCIIDecimalHexadecimal

<ES& ‘I*”	n0	nl		27	42	n0 nl	10	2A	n0 nl
Std.	ml	A?	...	n2	ml	m2 .. .	n2	ml	m2 .. .
n2

i

Selects one of eight graphics modes depending on the value of nO and prints bit-image graphics in this mode. See <ESC> “K” for information on nl, n2, ml, m2, ...

i c

/

i L--

i L.

n0	Graphics mode
0	Normal-density	( 60 dots per inch)
1	Double-density	(120 dots per inch)
2	Double-density, double-speed	(120 dots per inch)
3	Quadruple-density	(240 dots per inch)
4	CRT graphics, mode I	( 80 dots per inch)
5	Plotter graphics	( 72 dots per inch)
6	CRT graphics, mode II	( 90 dots per inch)
7	Double-density plotter graphics	(144 dots per inch)

Convert graphics density

Mode	ASCII		Decimal		Hexadecimal
Std.	cESC> “?” n	m	2763	nm	lB3F	nm

Converts graphics defined by subsequent <ESC> “K”, cESC> “L”, <ES0 “Y” or <ES0 “Z” commands to a density mode defined by <ES0 “*“. n is “K”, “L”, “Y” or “Z”, indicating the mode to be converted. m is a code from <o> to <7> indicating one of the modes of <Esc> “*“.

91