Star Micronics XR-1520, XR-1020 manual Select double or quadruple size, Select character size

Select double or quadruple size

Mode	ASCII	Decimal	Hexadecimal
Std.	cESC> “h” n	27104 n	18 68 n

Selects the size of subsequent characters as shown below. Extra- high characters align along the cap-line of normal characters, with the base line temporarily moving down. Line spacing is temporarily doubled when n = 1 and quadrupled when n = 2.

n Effect

0 Normal size

1 Double-high, double-wide

2 Quadruple-high, quadruple-wide

Select character size

Mode	ASCII		Decimal	Hexadecimal
Bo*	..(,. ..(.. “S” ..).. .‘)..	d	4040934141	d 2828532929	d

Selects a combination of character height and width according to the value of d, as below.

Does not move the base line.

d Line spacing Character height

0 Single width Single weight

1Double width Single height

2 Single width Double height

3 Double width Double height

Double-height characters are always printed at near letter quality. Double height printing temporarily cancels the super/subscript and condensed printing modes, but these modes resume when the printer mums to normal mode.

Print double-height characters

Mode	ASCII		Decimal		Hexadecimal
Std.	<pJC>	..wI. “1”	27 119	49	1B	77	31
	<Esc>	“W” <l>	27 119	1	1B	77	01

Prints subsequent characters at double height without moving the base line, and without changing the line spacing. Temporarily cancels super/subscript and condensed modes.

77