Star Micronics XR-1520, XR-1020 manual Clamp lever Pull tractor unit ractor cover

Clamp lever

Pull tractor unit

ractor cover

Figum 4-O. Mount the fanfdd paper to the Pull Tractor Unit by turntng ttm platen KtIOD.

12.Adjust the spacing of the optional tractor units by sliding them along the bar, using the clamp lever at the back of each unit to release and lock them in position. When the lever is up, the unit is released, and when it is down, the unit is locked.

13.Now close the tractor covets, again making sure that the paper holes are aligned with the pins on the optional tractor units. If they are not aligned properly, you will have problems with paper feeding, possibly resulting in tearing and jamming of the paper.

14.Remove the lever stopper from the slot of the release lever as shown in Figure 4-10.

15.Set the release lever to the “a” position, and turn the platen knob clockwise to tighten the paper if it is slack.