12
Detaching the Table-Top Stand from the TV

Remove only the screws marked with on

the TV.

~
•KDL-32EX700 model must remove the stand rear
cover prior to detaching the Table-Top Stand.
•Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
•When installing the TV on a wall, remove the four
screws from the rear of the TV. (They are fastened
in the screw holes for wall mounting.) Be sure to
store the removed screws in a safe place, keeping
them away from children.
•When attaching the Table-Top Stand again, be
sure to fasten the four screws (previously
removed) to the original holes on the rear of the
TV.
•Do not hold by the Stand Rear Cover while
carrying the Table-Top Stand to prevent dropping
the stand which may cause an injury or damage to
the property.