Manual abstract:
~· When you turn on the TV, the power indicator lights up in green. 6 GB 6:
Recommended setting for "Frequency" and "Network ID" is "Auto". This option is recommended for fast tuning when supported by your cable operator. If the "Quick Scan" does not tune, please use the "Full Scan" method below. "Full Scan" : All available channels are tuned and stored. This procedure may take some time. This option is recommended when "Quick Scan" is not supported by your cable provider.
If you select "Cable", the screen for selecting the scan type appears. See "To tune the TV for Cable connection" (page 7). The TV then starts searching for all
available digital channels, followed by all available analogue channels. This may take some time, so do not press any buttons on the TV or remote while
proceeding. If a message appears for you to confirm the aerial connection No digital or analogue channels were found.
Check all the aerial/cable connections and press to start
buttons on the TV or remote. · Some cable providers do not support "Quick Scan".
If no channels are detected using "Quick Scan", perform "Full Scan". 3 Programme Sorting (Only in analogue mode): Changes the order in which the analogue channels are stored on the TV. 1 Press F/f to select the channel you want to move to a new position, then press g. 2 Press F/f to select the new position for your channel, then press . If you do not change the order in which the analogue channels are stored on the TV, press HOME to go to next step. ~ · This step will not appear if any analogue channel is found. The message
Obtain information from the website below.
2 3 Lift up and tilt. Slide in. · To return to 0°, reverse the above procedure. 8 GB Safety Information
accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries. · When transporting the TV set, do not
subject it to jolts or excessive vibration.
·When transporting the TV set for repairs or when moving, pack it using the original carton and packing material. Ventilation · Never cover the ventilation holes or insert anything in the cabinet. · Leave space around the TV set as shown below. · It is strongly recommended that you use a Sony
in order to provide adequate
Disconnect the mains lead from the mains socket before working on or moving the TV set. Keep the mains lead away from heat sources. Unplug the mains plug and clean it regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire. Installation · The TV set should be installed near an easily accessible mains socket. · Place the TV set on a stable, level surface. · Only qualified service personnel should carry out wall installations..
Your user manual
SONY
Powered by TCPDF (www.tcpdf.org)