3Gently slide the TV unit onto the neck of the Table-Top Stand and align the screws holes.

~

•When you carry the TV unit, place your hand as illustrated (page 5) and hold it securely. Do not put stress on the LCD panel and the frame around the screen.

•Be careful to not pinch your hands or the AC power cord when you install the TV unit to the Table-Top Stand.

4Stabilize the TV unit and the Table-Top Stand with supplied 3 screws.

~

•If you use an electric screwdriver, set the torque for tightening at approximately 1.5 N·m {15Kgf·cm}.

Securing the TV

Sony strongly recommends taking measures to prevent the TV from toppling over; as unsecured TVs may topple and result in property damage, serious bodily injury or even death.

Prevent the TV from Toppling

sSecure the TV to a wall and/or stand.

sDo not allow children to play or climb on furniture and TV sets.

sAvoid placing or hanging items on the TV.

sNever install the TV on:

•slippery, unstable and/or uneven surfaces.

•furniture that can easily be used as steps, such as a chest of drawers.

sInstall the TV where it cannot be pulled, pushed, or knocked over.

sRoute all AC power cords and connecting cables so that they are not accessible to children.

Use a Sony TV Stand

Use a Sony specified TV stand (see page 2) and follow the instruction manual provided with the Sony TV stand.

If a Sony specified TV stand is not used, consider the following recommended measures.

Recommended Measures to Secure the TV

1Secure the stand for the TV.

Make sure the TV stand can adequately support the weight of the TV. Use two angle braces (not supplied) to secure the stand.

For each angle brace use the appropriate hardware to:

•attach one side of the angle brace to the wall stud.

•attach the other side to the TV stand.

Angle brace

Stand

6