2Secure the TV to the stand.

Use the optional hardware listed below (not supplied):

M6 × 12-18 mm anchor bolt (screwed into the TV’s Table-Top stand)

A screw or similar (attach it to the TV stand)

Rope or chain (strong enough to support the weight of the TV). Make sure that there is no excess slack in the rope or chain.

An alternative way to secure the TV is with an optional Sony Support Belt Kit.

Anchor bolt

Screw hole on the Table-Top

standScrew

~

Contact Sony Customer Support to obtain the optional Support Belt Kit by providing your TV model name.

For United States call: 1-800-488-7669 or visit: www.sony.com/accessories

For Canada call: 1-877-899-7669

3Anchor the TV to the Wall.

Use the hardware listed below (not supplied):

Two M6 × 12-18 mm anchor bolts (screw into the top-most wall-mount holes located on the rear of the TV)

Rope or chain (attach to one M6 anchor bolt)

Wall-anchor (attach to the wall stud) strong enough to support the weight of the TV (pass the rope through the wall-anchor, then attach to the other M6 anchor bolt).

Anchor bolts

 

 

Rope or

Wall-mount

 

chain

holes

 

 

Wall-

Getting

 

anchor

Started

 

~

Measure 2 provides minimal protection against the TV toppling over. For further protection, follow all three measures recommended above.

(Continued)

7