Getting Started

Connecting the TV

Getting

Cable System or VHF/UHF Antenna System

You can enjoy high-definition and standard-definition digital programming (if available in your area) along with standard-definition analog programming.

This TV is capable of receiving unscrambled digital programming for both cable (QAM and 8VSB) and external VHF/UHF antenna (ATSC).

It is strongly recommended that you connect the CABLE/ANTENNA input using a 75-ohm coaxial cable to receive optimum picture quality. A 300-ohm twin lead cable can be easily affected by radio frequency interference, resulting in signal degradation.

Cable or VHF/UHF (or VHF only)

75-ohm coaxial cable Rear of TV CABLE/ANTENNA

Started

Cable System and

VHF/UHF Antenna

System

Use an optional A-B RF switch (not supplied) to switch between the cable and over-the-air antenna programming, as indicated below.

A/B

 

RF Switch

 

Cable

A

Rear of TV

 

B

Antenna

CABLE/ANTENNA

Be sure to set the Cable setting to On or Off in the Channel settings for the type of input signal you choose (see page 31).

13