Getting Started

1. Installing the TV

This TV can be mounted on a wall using a Wall- Mount Bracket or placed on a TV stand (each sold separately). This section will explain:

•How to carry the TV•Preparation for a Table-Top stand•Preparation for a Wall-Mount Bracket•Installation against a wall or enclosed area•Bundling the connecting cables•Securing the TV
Preparation for Table-Top Stand
Follow the assembling steps required to place on a TV stand.

1Remove the Table-Top Stand and screws from the carton. The screws can be found in the accessory bag.

Table-Top Stand

Carrying the TV

Be sure to follow these guidelines to protect your property and avoid causing serious injury.

•Before carrying the TV, disconnect all cables.•Carrying the large size TV requires two or more people.

•When carrying the TV, place your hand as illustrated and hold it securely. Do not subject the TV to shocks, vibration, or excessive force.

•Lift the TV by placing your palm directly underneath the panel but do not put stress on the LCD panel.

• Do not lift the TV from the bottom center.

TV Unit

Stand Rear

Cover

2Place the Table-Top Stand on a level and stable surface.

3Gently slide the TV unit onto the neck of the Table-Top Stand and align the screw holes.

~

•Do not put stress on the LCD panel or the frame around the screen.

•Be careful to not pinch your hands or the AC power cord when you install the TV unit to the Table-Top Stand.

4Use the supplied screws to attach the TV unit to the Table-Top Stand (refer to the “Attaching the Table-Top Stand” flyer).

If an electric screwdriver is used, set the torque to tighten at approximately 1.5 N·m, 15 Kgf·cm.

6