System Update Enables the TV to automatically receive software updates free through your existing aerial/cable (when issued). We recommend that you leave the setting to “On” at all times.
~
•For the software upgrade to be able to take place the TV set should be left in
System | Displays the current software version and the signal level. |
Information |
|
~
•If signal bar is red (no signal) or amber (low signal), check the aerial/cable connection.
Time Zone | Allows you to manually select the time zone you are in, if it is | |
| not the same as the default time zone setting for your country/ | |
| region. |
|
|
| |
Auto DST | Sets whether or not to automatically switch between summer | |
| time and winter time. | |
|
|
|
| On | Automatically switches between summer |
|
| time and winter time according to the |
|
| calendar. |
|
|
|
| Off | The time is displayed according to the |
|
| time difference set by “Time Zone.” |
|
| |
Programme | You can switch GUIDE (Sony Guide or GUIDE Plus+). If | |
Guide | you change Sony Guide to GUIDE Plus+ programme, see | |
(only when GUIDE |
| |
Plus+ is available) | Condition that this feature is displayed is following: | |
| – in UK, Italy, France, Germany or Spain. |
– you can receive digital broadcasting.
– when “Antenna” is selected in step 7 of “5: Performing the initial
CA Module
Network Settings
Network | IP Address | DHCP (DNS | Automatically acquires the network |
| Settings | automatic) | settings through the Dynamic Host |
|
|
| Configuration Protocol server function of |
|
|
| the router or Internet service provider. |
|
|
|
|
|
| DHCP (DNS | Automatically acquires the network |
|
| manual) | settings except for DNS server settings. |
|
|
| You can manually set the DNS settings. |
|
|
|
|
|
| Manual | Allows you to set the network settings |
|
|
| according to your network environment. |
|
|
| |
| Test | Diagnoses whether the network is correctly connected. | |
|
|
| |
| IP Address/ | You need to configure each item when “Manual” is selected | |
| Subnet Mask/ | in “IP Address Settings.” | |
| Default Gateway/ | When “DHCP (DNS manual)” is selected, be sure to enter | |
| Primary DNS/ | “Primary DNS” and “Secondary DNS” server addresses | |
| Secondary DNS | manually. |
|
|
|
| |
| MAC Address | Displays the MAC address, which is a fixed, globally unique | |
|
| identifier of the network device. | |
|
|
|
|