Sony 4-116-578-11(1), KDL-40Z4500, KDL-46Z4500, KDL-52Z4500 48 GB, Digital Set-up, LNA, Skip, Tuning, RETURN, Tuning, Decoder, Confirm, Sorting, PROG +/–, Programme, Digital Auto, Digital Tuning, Digital Manual

LNA	Improves the picture quality for individual channels in the
	case of very weak broadcast signals (noisy picture).
	If you cannot see any improvement in the picture quality even
	if you set to “On”, set this option to “Off” (factory setting).
Skip	Skips unused analogue channels when you press PROG +/–
	to select channels. (You can still select a skipped channel
	using the number buttons.)
Decoder	Shows and records the scrambled channel selected when
	using a decoder connected directly to scart connector				/
	AV1, or to scart connector	/	/	AV2 via a
	VCR/DVD recorder.

~

•Depending on the country selected for “Country” (page 6), this option may not be available.

	Confirm	Saves changes made to the “Manual Programme Preset”
		settings.
Digital Set-up
Digital Tuning	Digital Auto	Tunes in the available digital channels.
	Tuning	This option allows you to retune the TV after moving house,
		or to search for new channels that have been launched by
		broadcasters. For details, see step 6 of “5: Performing the
		initial set-up” (page 6).
	Programme	Removes any unwanted digital channels stored on the TV,
	Sorting	and changes the order of the digital channels stored on the
		TV.

1Press F/f to select the channel you want to remove or move to a new position.

You can also select a channel by pressing the number buttons to enter its three-digit channel number.

2Remove or change the order of the digital channels as follows:

To remove the digital channel

Press . After a confirmation message appears, press G to select “Yes”, then press .

To change the order of the digital channels

Press g, then press F/f to select the new position for the channel and press G.

3Press RETURN.

Digital Manual	Tunes the digital channels manually. This feature is available
Tuning	when “Digital Auto Tuning” is set to “Antenna.”
	1	Press the number button to select the channel number
		you want to manually tune, then press F/f to tune the
	2	channel.
		When the available channels are found, press F/f to
	3	select the channel you want to store, then press .
		Press F/f to select the programme number where you
		want to store the new channel, then press .

Repeat the above procedure to manually tune other channels.

48 GB