Sony 4-116-578-11(1), KDL-40Z4500, KDL-46Z4500, KDL-52Z4500 46 GB, Analogue Set-up, Update, Control, Display, Tuner Box, All Reset, Auto TV On, HDMI Set-up, Device List, Auto Tuning, Programme List, Control for HDMI

HDMI Set-up	This is used to set the “Control for HDMI” compatible equipment connected to the
	HDMI sockets. Note that the interlock setting must also be made on the connected
	“Control for HDMI” compatible equipment side.
	Control for HDMI This sets whether to interlock the “Control for HDMI”

compatible equipment and the TV. When set to “On”, the following menu items can be performed. However, power consumption in standby mode is higher than usual. If the specific Sony equipment that is compatible with “Control for HDMI” is connected, this setting is applied to the connected equipment automatically when the “Control for HDMI” is set to “On” using the TV.

Auto Devices Off When this is set to “On”, the “Control for HDMI” compatible equipment turns off when you switch the TV to standby mode

	using the remote.
Auto TV On	When this is set to “On” and if the connected HDMI, control
	compatible equipment is turned on, the TV automatically
	turns on, and the displays the HDMI input from the
	connected equipment.
Tuner Box	If set to “Advanced”, you can select a channel tuned by
Control	connected equipment using the TV’s remote.
Device List	Creates or updates the “HDMI Device List.” Up to 14
Update	“Control for HDMI” compatible equipment can be
	connected, and up to 4 equipment can be connected to a
	single socket. Be sure to update the “HDMI Device List”
	when you change the “Control for HDMI” compatible
	equipment connections or settings. Select them manually one
	by one until getting a correct picture for several seconds.

HDMI Device List Displays the connected “Control for HDMI” compatible equipment.

~

•You cannot use “Control for HDMI” if the TV operations are linked to the operations of an audio system that is compatible with control for HDMI.

Product Information Displays your TV’s product information.

All ResetResets all settings to the factory settings and then displays the “Auto Start-up” screen.

z

•Be sure not to turn the TV off during this period (it takes about 30 seconds) or press any buttons.

•All settings, including digital favourite list, country, language, auto tuned channels, etc. will be reset.

Analogue Set-up

Programme List	Select “Off” to hide the list of analogue channels from the XMB™
Display	(XrossMediaBar).
Auto Tuning	Tunes in all the available analogue channels.
	This option allows you to retune the TV after moving house, or to search for new
	channels that have been launched by broadcasters.
Programme Sorting	Changes the order in which the analogue channels are stored on the TV.
	1	Press F/f to select the channel you want to move to a new position, then press
	2	.
		Press F/f to select the new position for your channel, then press .

46 GB