4:3 Default

Select the default screen mode to use for 4:3 sources

Wide Zoom

Enlarges the 4:3 picture to fill the 16:9 screen, displaying as much of

 

the original image as possible.

 

 

Normal

Displays the 4:3 picture in its original aspect ratio.

 

 

Full

Enlarges the 4:3 picture horizontally only, to fill the screen.

 

 

Zoom

Enlarges the picture horizontally and vertically to fill the screen while

 

maintaining the aspect ratio.

 

 

Off

Continues using the current Wide Mode setting when the channel or

 

input is changed.

~

•4:3 Default is not available when Auto Wide is set to Off.

•If 4:3 Default is set to anything but Off, the Wide Mode setting applies only to the current channel. When you change channels (or inputs), Wide Mode is automatically replaced with the 4:3 Default setting for 4:3 sources. To retain the current Wide Mode setting as channels and inputs are changed, set 4:3 Default to Off.

Display Area

+1

Displays the entire picture with a black frame on the edge of the

 

 

 

screen. This setting can be selected for video signals of HDMI input.

 

 

 

 

 

 

Normal

Displays the recommended picture area.

 

 

 

 

 

-1/-2

Enlarges the picture to hide the edge of the picture.

 

 

 

Screen Position

 

Adjust the Vertical positioning by pressing V/v. Press B/b to adjust the Horizontal

 

 

positioning.

 

~

•The Screen Position feature is useful if the TV is connected to game equipment.

•Screen Position is available only when Wide Mode is set to Zoom.

Vertical Size

Adjusts the vertical size of the picture. Press B/b and press

to adjust.

~

•Vertical Size is available only when Wide Mode is set to Wide Zoom or Zoom.

Screen settings for PC Timings (HDMI or PC input) differ from all other input modes and are shown below.

~

• It is normal to have a black frame surrounding the picture with all input formats.

Auto Adjust

Select Yes to start the auto adjust to display the PC input.

Reset

Resets the current screen setting to the default values.

 

 

Phase

Adjust after Pitch to fine tune overall sharpness.

 

 

Pitch

Adjust uneven sharpness on screen.

 

~

 

• For the PC Input Signal Reference Chart, see page 19.

 

 

H Center

Allows you to move the position of the picture horizontally (left and right).

 

To Adjust the H Center

 

Press V/v to highlight H Center and press .

 

Press B/b to correct the centering then press .

 

 

V Center

Allows you to move the position of the picture vertically (up and down).

 

To Adjust the V Center

 

Press V/v to highlight V Center and press .

 

Press B/b to correct the centering then press .

 

 

Menus the Using

(Continued)

41