Speakers

TV Speakers

Select to use the TV speakers for audio.

 

Audio System

Select this option if you wish to use an external audio system for the

 

 

TV sound. By selecting this option you are disabling the TV speakers.

 

 

 

Audio Out

Fixed

Select to fix the audio output and allow you to adjust the volume with

Easy control of volume

 

your audio system’s remote control. (The TV’s remote control’s VOL

adjustment

 

and MUTING buttons have no effect on Audio Out.)

 

 

 

 

Variable

Select to control the Audio Out’s volume and muting with your TV’s

 

 

remote control.

 

 

Woofer Level

Increases or decreases the low frequency sounds.

~

Alternate Audio is available only for digital programs. If the program you are watching is also available in other languages from the audio tracks, and if that language is what you have selected in the Language setting, your TV will automatically switch to the matching language with the Alternate Audio feature. The Alternate Audio option may be accessed by pressing OPTIONS on the remote control when alternate audio stream is available from the broadcaster.

Channel Settings

Cable

On

For receiving cable channels via cable TV provider.

 

Off

For using an antenna.

 

~

 

• You should run Auto Program after changing the Cable setting.

 

 

Auto Program

Automatically sets up the channel list on the TV for all receivable channels. Channel

 

scanning will be based on On/Off of Cable setting.

1

2

Select Auto Program.

Select OK to start Auto Program. When Auto Program is completed, the screen will display the number of channels found.

3Press RETURN to exit Auto Program.

~

Running Auto Program will clear Favorites list.

If you run Auto Program again, previously scanned channels will be overwritten with the newly scanned channels.

Add Digital Channels Select to add digital channels. Be sure to have the Cable option selected appropriately for the signal source. (Useful for antenna installation)

Show/Hide Channels Allows you to show or hide channels when you surf with the CH +/– button or in the TV channel list on the XMB.

1Press V/v to scroll through the channels until you highlight the channel to show or hide.

2Press to select Shown or Hidden.

To show or hide more channels, repeat steps 1-2.

~

Hidden channels can be accessed by entering the channel number with 0-9buttons on the remote control.

44