Sony KE-P37M1 2 or, 1 or, Input Signals, For mono equipment

Using Optional Equipment

1 Connect your equipment to the designated TV socket, as indicated on pages 38 to 42.

2 Switch on the connected equipment.

3 To watch the picture of the connected equipment, press the / button on the remote control repeatedly until the correct input symbol appears on the screen.

Symbol								Input Signals
		1,			2 or		3	• Audio/video input signal through the Scart connector I, Jor K.
				1 or		2		• RGB input signal through the Scart connector Ior J. This symbol appears only
								if an RGB source has been connected.
				S 3				• S video input signal through the Scart connector K.
			4					• Component input signal through the Y, PB/CB, PR/CR jacks Gand audio input
								signal through L.
	5							• Video input signal through the phono jack Cand audio input signal through D.
				S 5				• S video input signal through the S video input jack Band audio input signal	GB
								through D.

4 Press the button on the remote control to return to the normal TV picture.

•/ 1 Scart connector (I) outputs the video signal from only the TV tuner.

•/ 2 Scart connector (J) outputs all the video signals for the TV (not only from the TV tuner).

For mono equipment

Connect the phono plug to the L/G/S/I jack and press / repeatedly until the input symbol 5 or S 5 appears on the

screen.

Select the “Sound Adjustment” menu and set “Dual Sound” to “A” (see page 24).

Additional Information 43