Viewing pictures from equipment connected to the TV
1Connect your equipment to the designated TV socket, as indicated on page 38.
2 Switch on the connected equipment.
3To watch the picture from the connected equipment, press the 
button repeatedly until the correct input symbol appears on the screen.
Symbol | Input Signals | ||||||||
|
|
|
|
|
|
|
| 1 | • Audio / video input signal through the Scart connector I |
|
|
|
| ||||||
1 | • RGB input signal through the Scart connector I. This symbol appears only if | ||||||||
|
|
|
|
|
|
|
|
| an RGB source has been connected. |
|
|
|
| 2 | • Audio / video input signal through the Scart connector J. | ||||
|
|
| |||||||
2 | • RGB input signal through the Scart connector J. This symbol appears only if | ||||||||
|
|
|
|
|
|
|
|
| an RGB source has been connected. |
|
|
|
|
| 3 | • Audio/video input signal through the Scart connector K. | |||
|
| ||||||||
|
|
|
|
|
|
|
| S 3 | • S Video Input signal through the Scart connector K. This symbol appears only |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| if an S Video source has been connected. |
4 | • Component input signal through the Y, PB/CB, PR/CR jacks Hand audio input | ||||||||
|
|
|
|
|
|
|
|
| signal through G. |
|
| 5 | • Video input signal through the phono socket Band Audio input signal through | ||||||
| |||||||||
|
|
|
|
|
|
|
|
| C. |
S5 • S Video Input signal through the side S Video input jack Aand Audio signal through C. This symbol appears only if an S Video source has been connected.
4Press the 
button on the remote control to return to the normal TV picture.
For Mono Equipment |
|
Connect the phono plug to the L/G/S/I socket on the side of the TV and select | 5 or S 5 |
input signal using the instructions above. Next, refer to the “Sound Adjustment” section of this manual and set “Dual Sound” option to “A” on the sound menu screen (see page 20).
40 Additional Information