Setup
Cable and Antenna Only
For best results, use this connection if you:
sHave a cable and an antenna.
(This is convenient if you are using a separate rooftop antenna to receive additional channels that are not provided by your cable company.)
sDo not have a cable box or VCR. (If you have a cable box, see pages 25 and 27. If you have a VCR, see pages 30 and 32.)
For antenna connection, use the supplied antenna cable.
Cable Type | Connect As Shown |
Cable TV (CATV) | (No connection to |
and Antenna | TO COVERTER) |
| TO |
| VHF/UHF CONVERTER AUX |
| Antenna cable | CATV cable |
|
| (supplied) |
|
|
|
|
|
|
|
|
|
|
| About Using This Connection with Dual Picture (Twin View, etc.) Features |
| |
| With this connection, you cannot view antenna channels in the right dual picture |
| |
| window. |
|
|
|
|
|
|
| When using an indoor antenna, such as |
| |
| antenna, keep the antenna away from the TV. If not, noise may |
| |
| appear on the screen. |
|
|
Notes on Using This Connection |
|
| |
|
|
|
|
To Do This ... | Do This ... |
|
|
Switch the TV’s input between | Press ANT to switch back and forth between the TV’s VHF/UHF and AUX inputs. |
| |
the cable and antenna |
|
|
|
|
|
|
|
Receive channels using an | 1 Press ANT to switch to the AUX input. |
|
|
antenna, instead of the cable | 2 Set the Cable option to Off. For details, see “Selecting Channel Options” on |
| |
|
|
| |
3Run the Auto Setup program, as described in “Setting Up the Channel List” on page 48.
24