Menu System

Using the Features Menu

Using the Features menu you can:

a)Select if you want to listen to the sound from the TV set directly or through an external amplifier.

b)Automatically adjust the size of picture.

c)Select a time period after which the TV set switches itself into standby mode.

d)Lock the buttons on the TVset. In this way, the TV set only works by using the remote control buttons.

e)Select the source to be output from the Scart connector :3/q3 (SMARTLINK). In this way you can record from this scart connector while watching another source. If your VCR supports Smartlink, this procedure is not necessary.

1 Press the button on the remote control to display the menu on the screen.

2 Push the joystickto select thesymbol, then push to enter the Features menu.

3 Push the joystickorto select the desired menu item, then push to enter (see the table below for the effect of each menu item).

4 Pushorto select the desired setting and press the button to store.

5 Press the button to exit and return to the normal TV screen.

Features

Effect / Operation

 

 

Speaker

Main (sound from the TV set)

 

 

Centre In (sound from external amplifier)

 

Auto Format

Off: Size of picture is not automatically adjusted.

(only for aerial

Normal: Size of picture is automatically adjusted

signal)

according to the broadcaster information.

 

 

Full: The TV set automatically adjusts the picture

 

size to eliminate any dark areas on the TV picture.

Format Correction

Off: 4:3/14:9 is selected.

 

 

(only if Auto Format

On: Smart mode is selected automatically for

is set to “Normal”

or “Full”)

4:3/14:9 broadcast.

 

 

Sleep Timer

Off

 

 

 

10 min.

 

 

 

20 min.

 

 

 

.

 

 

 

 

 

 

 

 

.

 

 

 

 

 

 

 

 

.

 

 

 

 

 

 

 

 

90 min.

 

 

 

 

• One minute before the TV set switches into

 

 

 

 

standby mode, the time remaining is displayed

 

 

on the screen automatically.

 

 

 

 

 

 

•When watching the TV, press the

button

 

 

on the remote control to display the time

 

 

remaining.

 

 

 

 

•To return to normal operation from standby

 

 

mode, press the TV

button on the remote

 

 

control.

 

 

Parental Lock

Off (Normal mode)

 

 

 

On (The TV set can only be switched on using the

 

 

remote control, the buttons on the TV do not

 

 

work)

 

 

AV3 Output

TV (audio/video signal from the aerial)

 

 

AV1 (audio/video signal from the Scart

 

 

 

connector :1/

 

 

 

 

1).

 

 

 

 

 

 

AV2 (audio/video signal from the Scart

 

 

 

connector :2/

 

 

2).

 

 

 

 

 

AV3 (audio/video signal from the Scart

 

 

 

connector :3/q3 (SMARTLINK)).

 

 

AV4 (audio/video signal from the connector 4

 

 

placed in the front of the TV set).

 

If you have connected a decoder, please remember to change the AV3 Output back to "TV" for correct unscrambling.

 

Picture Adjustment

 

 

 

 

 

 

 

 

 

 

 

 

Picture Mode

 

 

 

Personal

 

Contrast

 

 

 

 

 

 

 

Brightness

 

 

 

 

 

 

 

Colour

 

 

 

 

 

 

 

Sharpness

 

 

 

 

 

 

 

Reset

 

 

 

 

 

 

 

AI

 

 

 

 

 

On

 

Noise Reduction

 

 

 

Off

 

Colour Tone

 

 

 

 

Normal

 

Select:

Enter Menu:

 

 

 

 

 

 

 

 

 

 

Features

 

 

 

 

 

 

 

 

 

 

 

 

Speaker

 

Main

 

 

 

Auto Format

 

 

 

 

Normal

 

 

 

Format Correction

On

 

 

 

 

Sleep Timer

Off

 

 

 

 

Parental Lock

Off

 

 

 

AV3 Output

 

TV

 

 

 

 

 

 

 

 

 

 

Select:

Enter:

 

 

 

 

 

 

 

 

 

 

 

Speaker

 

 

 

Main￿

 

 

 

Centre In

 

 

 

 

 

 

Auto Format

 

 

 

Off￿

 

 

 

Normal￿

 

 

 

 

 

 

Full

 

 

 

 

 

 

 

Format Correction

 

 

 

 

Off￿

 

 

 

 

On

 

 

 

 

 

Sleep Timer

10 min

 

 

 

Parental Lock

 

 

 

 

 

Off￿

 

 

 

 

On

 

 

 

 

 

 

 

 

 

 

 

 

AV3 Output

 

TV

 

 

 

 

AV1

 

 

 

 

 

 

 

 

AV2

 

 

 

 

AV3

 

 

 

 

AV4

 

16 Menu System