Overview

Overview of Remote Control Buttons

Muting the Sound: Press to mute TV sound. Press again to restore the sound.

Selecting TV mode: Press to switch off PAP,

To Temporarily Switch Off:

Press to temporarily switch off TV (the standby indicator on the TV set lights up in red). Press again to switch on TV from standby mode.

After 15-30 minutes without a signal and without any button being pressed, the TV set switches automatically into standby mode.

Multi PIP, Teletext or video input.

Displaying the time: Press to switch the time display on or off (available only when teletext is broadcast).

Displaying On Screen Information: Press to display all on-screen indications. Press again to cancel.

Media Selector:

With this remote control you can operate not only this TV but also the main functions of your VCR or DVD.

Switch on the device you want to operate and next press this button repeatedly to select the VCR, TV or DVD. A green light will be momentarily lit to indicate the chosen function.

Before the first time you want to control a DVD or VCR by using this remote

control, you have to set it up depending on the brand of the device to be used. For more details, refer to chapter “Remote Control Configuration for VCR or DVD” on page 33.

a)PAP (Picture And Picture):

For more details, please refer to the section “Using PAP (Picture And Picture)”.

b)Teletext:

Buttons with green symbols are also used for teletext operation. For more details, please refer to the section “Teletext” of this manual.

NexTView:

For more details, please refer to the section “NexTView” of this manual.

Joystick:

a)If Media Selector is switched to TV:

•When MENU is switched on, use these buttons to operate the menu system. For

details refer to “Introducing and Using the Menu System” on page 11.

•When MENU is switched off, press OK to show an overview of all TV channels. Then

press

or

to select the channel and

then press

 

button to watch the selected

channel.

 

 

 

b)If Media Selector is switched to VCR or DVD:

Using these buttons you can control

the main functions of your VCR or DVD.

Fastext: These buttons are also used for Fastext operation. For more details please refer to the “Fastext” chapter in the “Teletext” section of this manual.

Selecting Sound effect: Press this button repeatedly to change the sound effect.

Adjusting TV Volume: Press

this button to adjust the volume

of the TV.

VCR DVD on/off: Press this button to switch your VCR or DVD on or off.

Selecting Input source: Press this button repeatedly until the input of the desired source appears on the TV screen.

Selecting channels:

If Media Selector is switched to TV or VCR, press this button to select channels.

For double-digit programme numbers, enter the second digit within 2.5 seconds.

a)If Media Selector is switched to TV:

Press this button to watch the last channel selected (the last channel watched for at least 5 seconds).

b)If Media Selector is switched to VCR:

To select a double-digit programme on a Sony VCR, e.g. 23, press -/- - first and then the buttons 2 and 3.

a)Recording button:

If Media Selector is switched to VCR, press this button to record programmes.

b)Resetting to factory set levels:

Press, for a minimum of 3 seconds, to return the picture and sound settings to the factory default levels. This will also return the set to the install condition and the “Auto Tuning” menu will appear on the screen. If this is the case refer to the section “Switching on the TV set and automatically Tuning” (step 4) of this manual.

Freezing the picture: Press this button to freeze the picture. Press again to return to the normal picture.

Selecting Screen format: Press this button repeteadly to change the format of the screen (for more details, please refer to the section “Changing the Screen format”) of this manual.

Displaying Multi PIP (Picture In Picture):

Press to display Multi PIP mode. Press again to cancel. For more details, please refer to the section “UsingMulti PIP (Picture In Picture)”.

a)Selecting channels: Press this button to select the number of the next or previous broadcast channel.

b)Teletext: These buttons are also used for teletext operation. For more detail please refer to the section “Teletext” of this manual.

Displaying the menu system: Press this button to display the menu on the screen. Press again to remove the menu display from the screen.

Selecting Picture mode: Press this button repeatedly to change the picture mode.

6 Overview