Installing and Connecting the LCD Projection TV

Basic Connections (Connecting Cable TV or Antenna)

Connecting Directly to Cable or an Antenna

The connection you choose depends on the cable found in your home. Newer homes are equipped with standard coaxial cable (see A); older homes probably have 300-ohm twin lead cable (see B); other homes may contain both (see C).

AVHF Only or VHF/UHF or Cable

75-ohm coaxial cable

Rear of LCD projection TV

VHF/UHF

BVHF Only or UHF Only or VHF/UHF

300-ohm twin lead cable

Rear of LCD projection TV

VHF/UHF

Antenna connector

CVHF and UHF

75-ohm coaxial cable

 

Rear of LCD projection TV

U/V Splitter

VHF/UHF

(not supplied)

 

300-ohm twin lead cable

✍For optimum picture quality, a 75-ohm coaxial cable antenna connection is highly recommended. Radio waves and other interference can easily affect a 300-ohm twin lead cable, resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep it as far away as possible from the LCD projection TV.

✍Do not use an indoor antenna; they are especially susceptible to radio noise.

TV Projection LCD the Connecting and Installing

29