Getting Started
2Secure the TV to the Stand.
Use the optional hardware listed below (not supplied):
•M6 × 12mm anchor bolt (screwed into the TV’s
•A screw or similar (attach it to the TV stand).
•Rope or chain (strong enough to support the weight of the TV). Make sure that there is no excess slack in the rope or chain.
An alternative way to secure the TV is with an optional Sony Support
Belt Kit.
Anchor bolt
Screw hole on the | Screw |
| |
|
Contact Sony Customer Support to obtain the optional Support Belt Kit by providing your TV model name.
– For Canada call:
3Anchor the TV to the Wall.
Use the hardware listed below (not supplied).
•Two M4 ×
•Rope or chain (attach to one M4 anchor bolt).
•
Wall-
anchor
Anchor bolts
Rope or chain
Measure 2 provides minimal protection against the TV toppling over.
For further protection, follow all three measures recommended above.
If an electric screw driver is used, set the torque to tighten at approximately 1.5 N·m {15 kgf·cm}.
14