Sony KLV-S19A10, KLV-S26A10, KLV-S32A10 TV Controls and Connectors, Front and Top Panel

Introducing the TV

TV Controls and Connectors

Front and Top Panel
1		2		3	4		5		6
	ENTER WEGA		GATE
				TV/VIDEO		VOLUME		CHANNEL	POWER

qa

TV the Introducing

	PIC OFF	TIMER	POWER
	7 8	9	0
Item	Description
1 ENTER	Press to confirm the selection or setting.

2WEGA GATE Press to display WEGA GATE. Press again to exit WEGA GATE.

3TV/VIDEO Press repeatedly to cycle through the video equipment connected to the TV’s video inputs.

4	Press to adjust the volume. In the WEGA GATE screen, these buttons serve as left/right
– VOLUME +	buttons.
5	Press to scan through channels. To scan quickly through channels, press and hold down either

–CHANNEL + CHANNEL. In the WEGA GATE screen, these buttons serve as up/down buttons.

6 POWER Press to turn on and off the TV.

7(IR) Infrared Receives IR signals from the remote control.

	Receiver/Light	Senses room light level and adjusts the screen brightness accordingly (see page 61 for details).
	Sensor	Do not put anything near the sensor, as its function may be affected.
8	PIC OFF LED	When lit, indicates that the Picture Off feature is activated. For details, see page 61.
9	TIMER LED	When lit, indicates one of the timers is set. When the timer is set, this LED will remain lit even
		if the TV is turned off. For details, see page 58.
0	POWER LED	Lights up in green when the TV is turned on. If the LED blinks in red continuously, this may
		indicate the display unit needs servicing (see “Contacting Sony” on page 2).
qa	Speaker	Outputs audio signal.

The CHANNEL + button has a tactile dot. Use it as a reference when operating the TV.

13