Connecting the TV
Connecting Optional Equipment
VCR, Cable and Antenna
zThe most common setup is the Cable input into the VCR Antenna IN, the VCR Antenna Out to the VHF/UHF input.
You can connect a variety of optional equipment to your TV. This section provides some of the individual connections you can make. For multiple connections, please refer to the Quick Setup Guide.
This scenario shows a VCR with Cable signals connected through the video inputs and the Antenna connected through the VHF/UHF input. The Cable or VCR signals are selected by the VCR through the video inputs while TV signal (Antenna) is selected by the TV tuner.
To connect the VCR and cable
1Connect the CATV cable to the VCR’s VHF/UHF input jack.
2Connect the supplied
3Use an A/V and S VIDEO cables to connect the VCR’s AUDIO and S VIDEO output jacks to the TV’s AUDIO and S VIDEO input jacks (VIDEO 1 or 3).
4Run the Initial Setup Program, as described in “Setting Up the Channel List” on page 30.
If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.
|
|
|
|
| |
|
| coaxial cable |
|
|
|
| CATV cable | Rear of TV |
| VHF/UHF | |
|
|
|
| ||
| S VIDEO |
|
|
| PC |
|
|
| Y | AUDIO | |
|
|
| IN | ||
VCR | VIDEO |
| S VIDEO | PB |
|
|
|
| |||
| (yellow) |
| VIDEO | PR |
|
|
|
| L | L |
|
|
|
| (MONO) | L | |
|
|
|
| ||
|
| AUDIO | AUDIO |
| |
| (white) |
| R | R | R |
| 1 | 4 | |||
| 3 |
| |||
|
| VIDEO IN | HD/DVD IN | AUDIO | |
| (red) |
|
| (1080i/720p/480p/480i) | OUT |
|
|
|
|
| |
| S VIDEO cable |
|
|
|
|
| A/V cable |
|
|
|
|
22