To access Text

Press /.

Each time you press /, the display changes cyclically as follows:

Text mode t Text Superimpose mode t TV mode

tText mode t (repeat)

To select a page, press the number buttons or PROG +/–.

To hold a page, press /.

To reveal hidden information, press /.

To change brightness of Text, press repeatedly to choose between four different options.

To switch off Text, press .

Tips

•Ensure that the TV is receiving a good signal, or some text errors may occur.

•Most TV channels broadcast a Text service. For information on the use of the service, select the index page (usually page 100).

•When four coloured items appear at the bottom of the Text page, Fastext is available. Fastext allows you to access pages quickly and easily. Press the corresponding coloured button to access the page.

To change the wide screen mode

Press to change to 16:9 (wide screen mode).

To return to 4:3, press again.

4:3

16:9 aspect ratio (widescreen pictures) are displayed stretched in the vertical direction.

m M

16:9

16:9 aspect ratio (widescreen pictures) are in correct proportion.

Viewing pictures from connected equipment

Switch on the connected equipment, then perform one of the following operation.

For equipment connected to the Scart socket using a fully-wired 21-pin Scart lead

Start playback on the connected equipment.

The picture from the connected equipment appears on the screen.

For an auto-tuned VCR (page 12)

Press PROG +/–, or the number buttons, to select the video channel.

For other connected equipment

Press / repeatedly until the correct input symbol (see below) appears on the screen.

1/ 1:

Audio/video or RGB input signal through the Scart

socket 1/ 1. 1 appears only if an RGB source has been connected.

2/2:

Video input signal through the video socket 2, and audio input signal through the audio socket L/G/S/I

(MONO), R/D/D/D sockets 2. 2 appears only if the equipment is connected to the S video socket

2 instead of the video socket 2, and S video

input signal is input through the S video socket 2.

Additional operations

To

Do this

 

 

 

Return to the normal Press

.

TV operation

 

 

 

 

Access the Input

Press OK, then press ,. To select

signal index table

an input source, press M/m, then

 

press OK.

 

 

 

18 GB