| AV2 OUTPUT |
|
This option allows you to select the source to be output from the Scart connector | 2/ S 2 so that you can |
record from this Scart any signal coming from the projection TV or from an external equipment connected
to the Scart connector | 1/ | 1 or side connectors S 3 or | 3 and | 3. |
If your VCR supports SmartLink, this procedure is not necessary.
To do this:
Once you have entered into the “Features” menu as it is explained in the previous page and after selecting the option, press b. Then press vor Vto select the desired output signal:
•TV to output the aerial source.
•AV1 to output sources connected to 
1/
1.
•AV3 to output sources connected to 
3 and 
3.
• YC3 to output sources connected to S 3 and 
3.
•AUTO to output the signal that is being viewed on the TV.
• If you select “AUTO”, the output signal will always be the same one that is displayed on the screen.
• If you have connected a decoder to the Scart 
2/ S 2 or to a VCR connected to this Scart, please remember to change back the “AV2 Output” to “AUTO” or “TV” for correct unscrambling.
This option allows you to select the source you want to watch in the “PIP” screen.
To do this:
Once you have entered into the “Features” menu as it is explained in the previous page and after selecting the option, press b. Then press vor Vrepeatedly to select the desired source AV1, AV2, AV3 or TV. Finally press OK to store.
|
|
|
|
|
|
| To watch the “PIP” screen with the selected source, press |
| B |
|
|
|
|
| the / button on the remote control. |
|
|
|
|
|
|
| You can swap the screens by pressing the / button on |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
| B |
|
|
|
|
| |
|
|
|
|
|
| the remote control. |
B
PIP POSITIONThis option allows you to change the position of the “PIP” screen within the main screen.
To do this:
Once you have entered into the “Features” menu as it is explained in the previous page and after selecting the option, press v/V/B or bto select the desired position. Finally press OK to store.
18 The General TV Menus