This option allows you to designate a name to the external equipment you have connected to the input sockets of this projection TV.
To do this:
1Once you have entered into the “Set Up”menu as it is explained in the previous page and after selecting the option, press b, then press vor Vto select the input source you wish to name (AV1, and AV2 are for the rear Scarts and AV3 for side connectors). Next press b.
2A label automatically appears in the label column:
a)If you want to use one of the 6 predefined label (CAM, GAME, CABLE, AV, SAT, VIDEO or DVD), press vor Vto select the desired label and finally press OK to store.
b)If you want to set a different label, select Edit and press b. Then with the first element highlighted, press vor Vto select a letter, number or
This option is only available in Analogue mode.
This option allows you to:
a)Preset channels or the VCR channel one by one to the programme order of your choice.
To do this:
1Once you have entered into the “Set Up”menu as it is explained in the previous page and after selecting the option, press b. Next with Programme option highlighted press b.
Press vor Vto select which programme number you want to preset the channel on (for VCR, select programme number “0”). Then press B.
2After selecting the Channel option, press b. Then press the number buttons to enter directly the
channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press vor Vto search for it. When you have tuned the desired channel, press OK twice to store.
Repeat all the above steps to tune and store more channels.
b)Label a channel using up to five characters.
To do this:
Once you have entered into the “Set Up”menu as it is explained in the previous page and after selecting the option, press b. Next with the Programme option, highlighted press the PROG +/- button to select
the programme number with the channel you wish to name. When the programme you want to name appears on the screen, select the Label option and press b. Next press vor Vto select a letter, number or
c)Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture, however you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted.
To do this:
While watching the channel (TV Broadcast) you wish to fine tune, and once you have entered into the “Set Up”menu as it is explained in the previous page and after selecting the option, press b. Then select the AFT option and press b. Next press vor Vto adjust the fine tuning between
d)Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.
To do this:
Once you have entered into the “Set Up” menu as it is explained in the previous page and after selecting this option, press b. Next with the Programme option highlighted, press the PROG +/- button to select
the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press b. Next press vor Vto select Yes. Finally press OK twice to confirm and store.
To cancel this function afterwards, select “No” instead of “Yes” in the step above.
DETAIL SET UPOnce you have entered into the “Set Up”menu as it is explained in the previous page and after selecting this option, press b to acess to the “RGB Centring” option which allows you to readjust the horizontal position of the picture in case you need to do it when connecting an RGB source.
To do this:
While watching an RGB source select the “RGB Centring” option and press b. Then press vor Vto adjust the centre of the picture between
20 The General TV Menus