DETAIL SET-UP

This option access to a new menu window which contains the following features: “Manual Tuning”, “PIN Code”, “Software Download” and “System Information”.

All these features are explained from next page on.

CAM SET UP

Always switch the TV off before inserting or removing the CAM.

This option allows you to access a Pay Per View service once you have obtained a Conditional Access Module (CAM) and a viewing card. Please contact your nearest Pay-Per-View supplier for details.

To do this:

1Switch off the TV and unplug from the mains.

2Unscrew and remove the CAM slot cover.

3Insert the CAM into the slot on the rear of the Projection TV as shown. Take care not to damage the CAM when inserting.

4Insert your viewing card into the CAM.

5After inserting the CAM and the viewing card, replace the cover.

6

Connect the TV to the mains and switch on.

GB

 

7

With the TV in Digital mode, press the

button on the remote control to

 

display the “Digital INFO display”. Press the BLUE button to display the

 

“Main Menu”.

 

 

8

Press the Vor vbutton to highlight “Detail Set-up” then press the OK

 

button to display the “Detail Set-up” menu.

9

Press the Vor vbutton to highlight “CAM Set-up”, then press the OK

 

button to display the CAM set up menu.

 

 

For further information regarding the CAM and services available, please contact your nearest Pay-Per-View supplier.

The Digital Menus 25