Adjusting Colour Registration (Convergence)

Due to the earth’s magnetism, the picture might become undefined and you could see different colours on the outlines of the images.

In that case, proceed as follows.

Auto converge the Red, Green, and

Blue Lines

1 Press on the mark , on the right side of the projection TV.

2Press / button.

The Auto Convergence function works for about 10 seconds. When the white cross disappears from the screen, your projection TV is ready for use.

The Auto Convergence function does not work when:

• no signal is input.

• the input signal is weak.

• the screen is exposed to spotlights or direct sunlight.

•you watch the teletext broadcast.

•you watch NexTView.

Introducing and Using the Menu system

Your projection TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system:

1

Press the MENU button to switch the first level menu on.

MENU

 

Picture Adjustment

 

 

 

 

 

 

 

Picture Mode

 

 

Personal

Contrast

 

 

 

 

 

 

 

 

 

 

 

 

Brightness

 

 

 

 

Colour

 

 

 

 

Sharpness

 

 

 

Reset

 

 

Noise Reduction

 

AUTO

 

Picture Adjustment

 

 

Picture Mode

Personal

 

Contrast

 

 

 

Brightness

 

 

 

Colour

 

 

 

Sharpness

 

 

 

Reset

 

 

Noise Reduction

AUTO

 

 

 

 

 

Select:

Enter Menu:

Select:

Enter Menu:

2• To highlight the desired menu or option, press or .

•To enter the selected menu or option, press .

•To return to the last menu or option, press .

•To alter the settings of your selected option, press / / or .

•To confirm and store your selection, press OK.

3 Press the MENU button to remove the menu from the screen.

MENU

10 First Time Operation - Menu System