Sony KP-44PX2U manual 13

Level 1			Level 2	Level 3 / Function
	Picture Adjustment			SLEEP TIMER
	Picture Mode	Personal		The “Sleep Timer” option in the “Features” menu allows you to
	Contrast
	Brightness			select a time period for the TV to switch itself automatically into the
	Sharpness
	Colour			standby mode.
	Noise Reduction	AUTO
	Reset

Select: Enter Menu: To do this: after selecting the option press , then press or to

set the time period delay (max. of 4 hours).

Features
Sleep Timer	Off
Auto Format	On
AV3 Output	AUTO
PIP Input	AV1
PIP Position

Features
Sleep Timer	Off
Auto Format	On
AV3 Output	AUTO
PIP Input	AV1
PIP Position

Select: Enter Menu: Select: Enter:

•While watching the TV, you can press the button on the remote control to display the time remaining.

•One minute before the projection TV switches itself into standby mode, the time remaining is displayed on the TV screen automatically.

	Picture Adjustment
Picture Mode			Personal
	Contrast
	Brightness
	Colour
	Sharpness
	Reset
Noise Reduction			AUTO
	Select:	Enter Menu:

Features
Sleep Timer	Off
Auto Format	On
AV3 Output	AUTO
PIP Input	AV1
PIP Position

Select: Enter Menu:

Features
Sleep Timer		Off
Auto Format		On
AV3 Output		AUTO
PIP Input		AV1
PIP Position
Select:	Enter:

AUTO FORMAT

The “Auto Format” option in the “Features” menu allows you to automatically change the aspect ratio of the screen.

To do this: after selecting the option, press . Then press or to select On (if you wish the TV set to automatically switch the screen format according to the broadcast signal) or Off (if you wish to keep your preference). Finally press OK to store.

Even if you have selected “On” or “Off” in the “Auto Format” option, you can always modify the

format of the screen by pressing repeatedly on the remote control to select one of the following formats:

Smart: Imitation of wide screen effect for 4:3 broadcast.

4:3: Conventional 4:3 picture size, full picture information.

14:9: Compromise between 4:3 and 16:9 picture size.

Zoom: Widescreen format for letterbox movies.

Wide: For 16:9 broadcast. Full picture information.

In “Smart”, “Zoom” and “14:9” modes, parts of the top and bottom of the screen are cut off. Press or to adjust the position of the image on the screen (e.g. to read subtitles).

GB

Smart

4:3

14:9

Zoom

Wide

	Picture Adjustment
Picture Mode			Personal
	Contrast
	Brightness
	Colour
	Sharpness
	Reset
Noise Reduction			AUTO
	Select:	Enter Menu:

Features
Sleep Timer	Off
Auto Format	On
AV3 Output	AUTO
PIP Input	AV1
PIP Position

Select: Enter Menu:

Features
Sleep Timer		Off
Auto Format
		On
AV3 Output		AUTO
PIP Input		AV1
PIP Position
Select:	Enter:

AV3 OUTPUT

The “AV3 Output” option in the “Features” menu allows you to

select the source to be output from the Scart connector 3/ S 3

so that you can record from this Scart any signal coming from the projection TV or from an external equipment connected to the Scart

connectors	1/	1 or	2/	2 or side connectors S 4 or
4 and	4.

If your VCR supports Smartlink, this procedure is not necessary.

To do this: after selecting the option, press . Then press or to

select the desired output signal: TV, AV1, AV2, AV4, YC4 or AUTO.

If you select “AUTO”, the output signal will always be the same one that is displayed on the screen.

If you have connected a decoder to the Scart 3/ S 3 or to a VCR connected to this Scart, please remember to change back the “AV3 Output” to “AUTO” or “TV” for correct unscrambling.

continued...

Menu System 13