Switching On the Projection TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen, 2) search and store all available channels (TV Broadcast) and 3) change the order in which the channels (TV Broadcast) appear on the screen.
However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in the 
(Set Up menu) or by pressing the Auto Start Up Button 
/
on the TV set.
1 Connect the Projection TV plug to the mains socket
The first time that the TV set is connected, it is usually turned on. If the TV is off, press the
on/off button on the TV set to turn on the TV.
The first time you switch on the TV, a Language menu displays automatically on the TV screen.
2 Press the 
or 
button on the remote control to select the language, then press the OK button to confirm your selection. From now on all the menus will appear in the selected language.
3 The Auto Tuning menu appears on the screen. Press the OK button to select Yes.
4 The projection TV starts to automatically search and store all available broadcast channels for you.
This procedure could take some minutes. Please be patient and do not press any buttons, otherwise automatic tuning will not be completed.
Language |
|
|
|
|
|
| Language |
English |
|
| English |
Norge |
|
| Norge |
Français |
|
| Français |
Italiano |
|
| Italiano |
Nederlans |
|
| Nederlans |
|
|
| Select Language: Confirm: OK |
Select Language: | Confirm: OK |
|
|
|
|
|
|
Language
English
Norge
Français
Italiano
Nederlans
Select Language:
Confirm: OK
Do you want to start automatic tuning?
Yes
No
Auto Tuning
Programme:1
Channel:C 01
SystemB/G
Searching...
In some countries the TV Broadcaster installs the channels automatically (ACI system). In this case, the TV Broadcaster sends a menu in which you can select your city by pressing the 
or 
button and OK to store the channels.
If no channels were found during the auto tuning process then a new menu appears automatically on the screen asking you to connect the aerial. Please connect the aerial (see page 7) and press OK. The auto tuning process will start again.
No channel found
Please connect aerial
Confirm
continued...
8 | First Time Operation |
|
|