Getting Started - Overview

Overview of Remote Control Buttons

Muting the Sound

Press to mute TV sound.

Press again to restore the sound.

Displaying On Screen Information Press to display all on-screen indications. Press again to cancel.

Selecting channels

Press to select channels.

For double-digit programme numbers, e.g. 23, press -/-- first, then the buttons 2 and 3.

If you enter an incorrect first digit, this should be corrected by entering another digit (0-9) and then selecting -/-- button again to enter the programme number of your choice.

Selecting TV mode

Press to switch off Teletext or video input.

Selecting Teletext

Press to switch on Teletext.

Selecting Sound mode

Press to change the sound mode.

Selecting Picture mode Press to change the picture mode.Adjusting TV Volume

Press to adjust the volume of the TV.

1 2 3

4 5 6

7 8 9

0

MENU

K

PROGR

RM 887

S

To Temporarily Switch Off TV Press to temporarily switch off TV (the standby indicator on TV lights up). Press again to switch on TV from standby mode. To save energy we recommend switching off completely when TV is not in use.

After 15-30 minutes without a TV signal and without any button being pressed, the TV switches automatically into standby mode.

Selecting Input source

Press repeatedly until the desired input symbol of the source appears on the TV screen.

Back to the channel last watched Press to watch the last channel selected (watched for at least 5 seconds).

Displaying the menu system

Press to display the menu on the TV screen. Press again to remove the menu display from the TV screen.

Menu selection

Scroll Up

Scroll Down

Previous menu or selection

Next menu or selection

OK Confirms your selection

Selecting Screen format

Press to view programmes in 16:9 mode. Press again to return to 4:3 mode.

This button only works in Teletext mode.

Function associated to this button does not work with this TV.

Selecting channels

Press to select the next or previous channel.

Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details, please refer to the "Teletext" section of this instruction manual.

Getting Started - Overview 7