Using your New TV (continued)
Watching two programs at one time - PIP
The
Certain models
The sound of the main picture is received.
Main picture
REFER TO THE ILLUSTRATION OF
THE REMOTE CONTROL ON THE
INSIDE FRONT COVER OF THIS
MANUAL AS YOU REVIEW THIS
CHART
Window picture
PIP to operate.
Tip z
ToensureacorrectsingletunerPIPconnection
•A cable or antenna is connected to the VCR
•The VCR is connected to your TV
•The VCR is turned on
Note
•You must press TV (FUNCTION) before you can control PIP with the yellow labeled buttons.
16
Use the Yellow Labeled Buttons for PIP Operations.
PIP | Press once to display the window picture (1/9 size). | ||
Press again to reduce the size of the window picture (1/16 size). | |||
| |||
| Press a third time to remove the window picture. | ||
|
| ||
TV/VIDEO | Press repeatedly to step through available video inputs: | ||
TV, VIDEO 1, VIDEO 2, and VIDEO 3 | |||
| |||
| 27V65 only) |
| |
| If you have a single tuner, your PIP input source is the VCR. | ||
|
| ||
AUDIO | Press to alternate sound between the main picture and the window | ||
| picture. A | will appear for a few seconds to indicate which picture is | |
| receiving sound. | ||
|
|
|
Use the Yellow Labeled Buttons for PIP Operations.
TV/VTR | Press to change the TV channel in the window picture. |
+For models
CH | the main CH +/- buttons to change channels. (see right) |
– |
|
|
|
POSITION | Press to move the location of the window picture (counterclockwise) around the |
| main picture. |
|
|
FREEZE | Press to freeze the window picture. Great for copying down phone numbers, |
| addresses, recipes, etc. |
| Press FREEZE again to restore the previous screen(s). |
|
|
SWAP | Press to switch the audio and video of the main picture and the window picture. |
| Each time you press SWAP, the picture and sound of the two will be swapped. |
| Any channels being received through the AUX jack cannot be displayed as a |
| window picture. |
Changing channels with a single tuner PIP
•
1Press TV/VIDEO until you reach the TV input.
2Press PIP (the window picture appears).
To change the window picture:
1Press VTR/DVD (FUNCTION).
2Press the main CH +/– buttons to change channels.
To change the main picture:
1Press TV (FUNCTION).
2Press the main CH +/– buttons to change channels.
Note
•If you have the same program in both the window and the main picture and cannot change the channel in the window; press TV/VIDEO until you reach the TV input in the main picture.
17
— 14 —