Additional TV Features
Manually tuning the TV
You have already tuned the TV automatically using the instructions at the start of this manual. You can however carry out this operation manually, adding channels to the TV, one at a time.
1. Press the MENU button on the remote control to display the menu on the TV screen.
2. Press the v button to select the 
symbol on the TV screen then press the b button to enter the PRESET menu.
3. Press the v button to select ‘Manual Programme Preset’ on the menu screen then press the b button to enter the ‘MANUAL PROGRAMME PRESET’ menu.
03
4. Press the V or v buttons to select an unused programme number for your channel then press the b button to enter.
5. Press the V or v buttons to select the TV broadcast system (I for analogue or DIG for digital) or a video input source (AV1, AV2 ...) then press the b button to confirm.
6. Select the first number digit of ‘CHAN’ (channel) then the second number digit of ‘CHAN’ with the number buttons on the remote control
or
Press the V or v buttons to search for the next available channel.
7.If you wish to change the ‘SERV’ service number, select each digit in turn and press the numbered buttons on the remote control to change to your desired service
8.If you do not wish to store this channel on the programme number you selected, press the V or v buttons on the remote control to continue searching for the desired channel.
9.If this is the channel you wish to store, press the OK button.
10.Repeat steps
NOTE: After manually tuning in the channels you require, you can sort the channels into the order you prefer by following the
procedure
23