Additional TV Features

Naming a channel (Analogue channels only)

Names for channels are usually taken automatically from Teletext if available. You can however name a channel or an input video source using up to five characters (letters or numbers).

1. Press the MENU button on the remote control to display the menu on the TV screen.

2. Press the v button to select the symbol on the menu screen then press the b button to enter the ‘PRESET’ menu.

3. Press the v button to select ‘Manual Programme Preset’ then press the b button to enter the ‘MANUAL PROGRAMME PRESET’ menu.

4. Press the V or v buttons to select the channel you wish to name.

5. Press the b button repeatedly until the first element of the ‘LABEL’ column is highlighted.

6. Press the V or v buttons to select a letter or number (select ‘-’ for a blank) then press the b button to confirm. Select the other four characters in the same way.

7.After selecting all the characters, press the OK button.

8.Repeat steps 4 to 7 if you wish to label other channels.

9.Press the MENU button to remove the menu from the TV screen.

25