Operation

Teletext

Most TV channels broadcast information via teletext. The index page of the teletext service (usually page 100) gives you information on how to use the service.

Please use a TV channel with a strong signal, otherwise there may be Teletext errors.

Switching Teletext on and off

1Select the TV channel which carries the teletext service you want to view.

2a Press the button once on your remote control to switch Teletext on. b Press again for Mix mode.

The TV broadcast and the Teletext display are overlapped.

3Press ;or press a third time to switch teletext off.

Selecting a Teletext Page

Input the three digits of the page number using the number buttons on your remote control.

If you have made a mistake:

Type in any three digits, then re-enter the correct page number.

Page Catching

1Using the number buttons on the remote control, select a teletext page which has several page numbers on it (e.g. the index page).

2Press the OK button.

Page Catching is displayed.

3Select the desired page number using 4or $then press the OK button. The requested page is displayed after some seconds.

Selecting the next or the preceding page

•Press (Page +) or (Page -).

Selecting the index page

•Press ;+ .

Selecting a subpage

A teletext page may consist of several subpages. In this case an information line is displayed, showing the number of subpages.

•Select the mode by pushing to 4. Select the subpage by using 4or $.

Freezing a Teletext subpage

1Press to freeze the Teletext page.

2Press to resume normal teletext reception.

Using Fastext*

*depending on availability of service

Fastext lets you access pages with one button stroke. When Fastext is broadcast, a colour-coded menu appears at the bottom of the screen. The colours of this menu correspond to the red, green, yellow and blue buttons on the remote control.

•Press the coloured button which corresponds to the colour in the colour-coded menu.

216-02

01 02 03 04 05 06 07 08

12