Safety First
TV sets operate on extremely high voltages. To prevent fire or an electric shock, please follow the safety information below:
For General Safety
ϖThis TV set is designed to receive and reproduce audio and video signals. Any other use of the TV set is not permitted.
ϖNever open the rear cabinet.
ϖRefer servicing to qualified personnel only!
ϖDo not expose the TV set to rain or moisture.
For Safe Installation
ϖDo not block or cover the ventilation openings. For ventilation leave a space of at least 5 cm around the set.
ϖDo not install the TV set in hot, humid or excessively dusty places.
ϖDo not install the TV set where it may be exposed to mechanical vibrations.
ϖPlace the TV set only on a stable stand designed for the weight and dimensions of the TV.
For Safe Operation
ϖOperate the TV set only on a 220- 240 V. AC, 50 Hz supply.
ϖUnplug the TV set if any liquid or solid object falls in through the ventilation openings. Have it checked immediately!
ϖWhen not in use, do not leave the TV set in standby mode. Disconnect the TV set if you are not going to use it for a longer period.
ϖDisconnect the TV set only by pulling on the mains plug. Do not pull on the power cord itself.
ϖIn the event of a thunderstorm, you should not touch the aerial, mains plug or television. It could possibly cause an electric shock.
For Maintenance
ϖWhen the TV is switched off, clean the screen with a soft dampened cloth. Do not use any abrasive cleaners.
ϖDust and nicotine deposits may cause heat accumulation inside the TV set.
In the long term this could be a safety risk and may shorten the lifetime of your TV set. Therefore have your set serviced about every five years.
2