The Picture Adjustment Menu
MENU
Picture Adjustment |
|
| Picture Adjustment |
|
Picture Mode: | Live |
| Picture Mode: | Live |
Contrast: |
|
| Contrast: |
|
Reset |
|
| Reset |
|
Noise Reduction: | Auto | , | Noise Reduction: | Auto |
Colour Tone: | Cool | Colour Tone: | Cool |
The “Picture Adjustment” menu allows you to alter the picture settings.
To do this:Press the MENU button and then press OK to enter this menu. Next press vor Vto select the desired option and press OK. Finally read the instructions below on how to operate each option.
Select: | Enter: OK | Exit: MENU | Back: | Select: | Enter: OK |
OK
MENU
| Picture Mode | This option allows you to customise the Picture Mode based on the programme |
| ||
| you are watching. After selecting this option press OK. Next press vor V |
| ||
| repeatedly to select: |
| ||
| Personal (for individual settings). |
| ||
| GB | |||
| Live (for live broadcast programmes, DVD and Digital Set Top Box receivers) |
| ||
|
| |||
| Movie (for films). |
| ||
| Once you have selected your desired option, press OK to store. |
| ||
"Brightness", "Colour" and "Sharpness" level of "Live" and "Movie" mode are fixed in the |
| |||
factory to get the best picture quality. |
| |||
|
|
|
|
|
| Contrast | Press B or bto reduce or enhance picture contrast. Next press OK to store. |
| ||
|
|
|
| |
| Brightness | Press B or bto darken or brighten the picture. Next press OK to store. |
| ||
This option only appears for alteration if "Picture Mode" is set to "Personal".
| Colour | Press B or bto decrease or to increase color intensity. Next press OK to store. |
This option only appears for alteration if "Picture Mode" is set to "Personal".
| Hue | Press B or bto decrease or to increase the green tones. Next press OK to store. |
This option only appears for NTSC signal (e.g. USA video tapes).
Sharpness Press B or bto soften or to sharpen the picture. Next press OK to store.
This option only appears for alteration if "Picture Mode" is set to "Personal".
Reset | Press OK to reset the picture to the factory preset levels. |
|
|
| Noise | This option is set to Auto to automatically reduce the snowy picture that may be |
| Reduction | visible in the broadcast signal. However, it can be modified by pressing vor V |
| to select Off, Low, Mid or High. Finally press OK to store. |
|
|
| Colour Tone | This option allows you to alter the tint of the picture. After selecting this option |
| press b. Next press vor Vrepeatedly to select: Warm (gives the white colours |
| a red tint), Normal (gives the white colours a neutral tint), Cold (gives the white |
| colours a blue tint). Next press OK to store. |
|
|