This option allows you to:
a)Preset broadcast channels or the VCR channel one by one to the programme order of your choice.
To do this:
1Once you have entered the “Set Up”menu as explained on page 16 and after selecting the "Manual
Programme Preset" option, press OK. Next with Programme option highlighted press OK.
Press vor Vto select which programme number you want to preset the channel on (for VCR, select programme number “0”). Then press B.
2After selecting the Channel Number option, press OK. Then press the number buttons to enter directly the
channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press band vor Vto search for it. When you have tuned in to the desired channel, press OK twice to store.
Repeat all the above steps to tune and store more channels.
b)Label a channel using up to five characters.
To do this:
Once you have entered the “Set Up”menu as explained on page 16 and after selecting the "Manual Programme Preset" option, press OK. Next with the Programme option, highlighted press the PROG +/- button to select the
programme number of the channel you wish to name. When the programme you want to name appears on the screen, select the Label option and press OK. Then, with the first element highlighted, press v, V, Bor bto select the letter, then press OK. When you have finished, press v, V, Bor bto select the word “End” on the screen and finally press OK to renove menu from the screen.
•To correct the letter, select "%" on the screen to go back and press OK.
•For a blank, select " 
" on the screen and press OK.
c)Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture, however, you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted.
To do this:
While watching the channel (TV Broadcast) you wish to fine tune, and once you have entered the “Set Up” menu
as explained on page 16 and after selecting the "Manual Programme" option, press OK. Then select the AFT option and press b. Next press v or Vto adjust the fine tuning between
d)Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.
To do this:
Once you have entered the "Set Up" menu as explained on page 16 and after selecting the "Manual Programme Preset" option, press OK. Next with the Programme option highlighted, press the PROG +/- button to select
the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press b. Next press v or Vto select On. Finally press OK twice to confirm and store.
To cancel this function afterwards, select “Off” instead of “On” in the step above.