Sony KV-29FX201D manual 10

First Time Operation - Basic Presetting

Automatically Tuning the TV using the Remote Control

You need to tune the TV to receive channels (TV Broadcast). By following the instructions below, this TV automatically searches and stores all available channels for you.

After having selected the language, a new menu appears automatically on the TV screen asking you to automatically tune the TV. However, if you need to change or repeat the tuning afterwards (e.g. when you move house), select the menu AUTO PROGRAMME in the (SET UP) menu and proceed in the same way as described below in step 1 or, please refer to the section "Automatically Tuning the TV using the TV buttons" of this instruction manual.

1 2 3

4 5 6

7 8 9

0

MENU

K

PROGR

RM 887

1 Press the OK button on the remote control to select YES.

A new menu appears automatically on the screen asking you to check that the antenna is connected.

2 Confirm that the antenna is connected and then press the OK button.

The automatic tuning starts and the message "Searching..." flashes on the screen.

This procedure could take some minutes.

When the automatic tuning is finished, the Programme Sorting menu appears on the TV screen.

Notes: • To stop the automatic tuning, press the MENU button.

•If you stop the automatic tuning by pressing the MENU button, the Programme Sorting menu does not appear automatically on the TV screen.

Do you want to start

automatic tuning?

	Do you want to start
YES	automatic tuning?
		YES
NO		NO

Please confirm that antenna is connected

CONFIRM

AUTO PROGRAMME
PROGRAMME:	01
SYSTEM:	B/G
CHANNEL:	C 21
Searching...

PROGRAMME SORTING

PROGRAMME: 01 03

CONFIRM

Select Channel: PROGR

Select new position:

Confirm:

Exit: MENU

S

10 First Time Operation - Basic Presetting