Advanced Operation - Advanced Presetting
Automatically Tuning the TV using the TV buttons
Besides the explanation in the section “Automatically Tuning the TV using the Remote Control“, by following the instructions below, this TV also searches and stores automatically all available channels using just one button of the TV set.
1 Press the flap on the front of the TV by pressing on the
mark to reveal the front control panel.
1 2 3
4 5 6
7 8 9
0
MENU
K
PROGR
2 Press and hold in the 
button on the TV set for some seconds, until a menu appears automatically on the screen asking you to check that antenna is connected.
3 Confirm that the antenna is connected and then press the OK button.
The automatic tuning starts and the message "Searching..." flashes on the screen.
This procedure could take some minutes.
When the automatic tuning procedure is complete, the menu disappears from the TV screen and your TV is now ready for use.
Note: To stop the automatic tuning, press the MENU button on the remote control.
Please confirm that antenna is connected
| Please confirm that | ||
CONFIRM | antenna is connected | ||
|
|
| |
| CONFIRM | ||
Please confirm that antenna is connected
CONFIRM
AUTO PROGRAMME |
|
PROGRAMME: | 01 |
SYSTEM: | B/G |
CHANNEL: | C 21 |
Searching... |
|
RM 887
S
12 Advanced Operation - Advanced Presetting