Additional TV Features

Automatically tuning the TV

You have already tuned in all available channels using the ‘Automatically tuning the TV’ section at the start of this manual. If you need to repeat the tuning procedure however, follow the instructions below and the TV automatically searches and stores all available channels for you.

1.Press the MENU button on the remote control to display the menu on the TV screen.

2.Press the v button on the remote control to select the symbol on the menu screen then press the b button to

enter the ‘PRESET’’ menu.

3.Press the V or v button to select ‘Auto Programme’ then press the b button to display the autotune menu.

4.Press the V or v buttons to select ‘YES’ then press the OK button to confirm.

5.Ensure the antenna is connected as instructed, then press the OK button to confirm. The TV starts to automatically search and store all available channels for you. Please be patient and do not press any buttons.

The digital channels will be stored on programme numbers 1-90 and the analogue channels on programme numbers 91-99.

Note: If any digital channels are stored on programme numbers 91-99 during the Automatic Tuning procedure, then no analogue channels will be allocated. If this happens, please refer to the section ‘Manually Tuning the TV’ on page 20 of this manual to tune in and store the analogue channels.

6.When the automatic tuning procedure is complete, the menu disappears from the TV screen. Press the PROGR+/- or the numbered buttons on the remote control to view the TV channels.

Do you want to start automatic tuning?

Yes

No

Confirm: OK

Please confirm that antenna is connected

Confirm: OK

Note: Press the MENU button if you wish to stop the automatic tuning procedure.

10