
V. Size Adjustment (VSIZ)
1.Input a crosshatch signal.
2.Activate the Service Adjustment Mode.
3.Select the VSIZ item with 1 and 4 .
4.Adjust value of VSIZ with 3 and 6 for the best vertical size.
5.Press MUTING then ENTER to save into the memory.
V. Center Adjustment (VPOS)
Perform this adjustment after performing H. Frequency (Free Run) Check.
1.Input a crosshatch signal.
2.Activate the Service Adjustment Mode.
3.Select the VPOS item with 1 and 4 .
4.Adjust value of VPOS with 3 and 6 for the best vertical center.
5.Press MUTING then ENTER to save into the memory.
H. Center Adjustment (HPOS)
Perform this adjustment after performing H. Frequency (Free Run) Check.
1.Input a crosshatch signal.
2.Activate the Service Adjustment Mode.
3.Select the HPOS item with 1 and 4 .
4.Adjust the value of HPOS with 3 and 6 for the best horizontal center.
5.Press MUTING then ENTER to save into the memory.
H. Size Adjustment (HSIZ)
1.Input a monoscope signal.
2.Activate the Service Adjustment Mode.
3.Select HSIZ with 1 and 4 .
4.Adjust with 3 and 6 for the best horizontal size.
5.Press MUTING then ENTER to save into the memory.
V. Linearity (VLIN), V. Correction (SCOR), PIN
Amp (PAMP), and Horizontal Trapezoid
(HTRP) Adjustments
1.Input a crosshatch signal.
2.Activate the Service Adjustment Mode.
3.Select VLIN, SCOR, PAMP, and HTRP with with 1 and 4 .
4.Adjust with 3 and 6 for the best horizontal size.
5.Press MUTING then ENTER to save into the memory.
V LINEARITY (VLIN)
V CORRECTION (SCOR)
PIN AMP (PAMP)
HORIZONTAL TRAPEZOID (HTRP)
| 59 |