Troubleshooting

Here are some simple solutions to problems which may affect the picture and sound.

Problem

No picture (screen is dark) and no sound.

Poor or no picture (screen is dark), but good sound.

No picture or no menu information from equipment connected to the Scart connector.

Good picture, no sound.

No colour on colour programmes.

When you switch on the TV does not appear the last channel you were watching before switching the TV off.

Distorted picture when changing programmes or selecting teletext.

Distorted picture when pressing the Remote Control Locator button.

Wrong characters appear when viewing teletext.

Wrong characters appear when viewing NexTView.

Solution

•Check the aerial connection.

•Plug the TV in and press the button on the front of the TV.

•If the standby indicator is on, press TV button on the remote control.

•Using the menu system, select the “Picture Adjustment” menu and select “Reset” to return to the factory settings.

•Check that the optional equipment is on and press the button repeatedly on the remote control until the

correct input symbol is displayed on the screen.

•Press the + button on the remote control.

•Check that “TV Speakers” is “On” in the “Sound Adjustment” menu.

•Check that headphones are not connected.

•Using the menu system, select the “Picture Adjustment” menu and select “Reset” to return to factory settings.

• This is not a malfunction. Press the number buttons on the

GB

remote control to select the desired channel.

 

•Turn off any equipment connected to the Scart connector on the rear of the TV.

•This is not a malfunction. It could be caused because some broadcast TV uses the same or close frequency as the remote control locator. This problem will disappear when you stop pressing the button.

•Using the menu system, enter to the “Language/Country” menu and select the country in which you operate the TV set. For Cyrillic languages, we recommend to select Russia country in the case that your own country does not appear in the list.

•Using the menu system enter to “Language/Country” menu (see page 14) and select the same language as the NexTView is broadcasted.

continued...

Additional Information 25