Problem
Picture slanted
Noisy picture when viewing a TV channel.
No unscrambling or unstable picture whilst viewing a scrambled channel with a decoder connected through the Scart connector
3/ S 3.
•The remote control beeps even you have not pressed the remote control locator button or on the contrary,
•When you press the remote control locator button, the remote control does not beep.
Remote control does not function.
The standby indicator 
on the TV flashes.
Solution
•Using the menu system, select the “Picture Rotation” option in the “Detail Set Up” menu to correct the picture slant.
•Using the menu system, select the “Manual Programme Preset” menu and adjust Fine Tuning (AFT) to obtain better picture reception.
•Using the menu system, select the “Noise Reduction” option in the “Picture Adjustment” menu and select “Auto” to re- duce the noise in the picture.
•Using the menu system, select the “Features” menu. Then enter to “Detail Set Up” option and set “AV3 Output” to “TV”.
•Check that the Decoder is not connected on the scart
2/
2.•Using the menu system, asign an ID (number) to your remote control. (See “Remote Control ID” on page 17).
•Replace the batteries of the remote control and asign again an ID (number) to your remote control. (See “Remote Control ID” on page 17).
•Check that the Media Selector on the remote control is set to the device you are using (VCR, TV or DVD).
•If the remote control does not operate the VCR or DVD even when the Media Selector has been set correctly. Enter the necessary code set as explained on “Remote Control Configuration for VCR/DVD” chapter of this instruction manual.
•Replace the batteries.
•Contact your nearest Sony service centre.
If you continue to experience problems, have your TV serviced by qualified personnel. Never open the casing yourself.
26Additional Information