Overview of Remote Control Buttons
@£
@™
@¡
@º
!ª
!•
!¶
!§
!∞
!¢
1 | 1 To Temporarily Switch Off TV: | |
|
| Press this button to temporarily switch off TV (the standby indicator on |
|
| the TV lights up). Press again to switch on TV from standby mode. |
2To save energy we recommend switching off completely when TV is not in use.
3After 15 minutes without a signal and without any button being pressed, the TV switches automatically into standby mode.
42 VCR or DVD on/off: Press this button to switch your VCR or DVD on or off.
3Media Selector:
5With this remote control you can operate not only this TV but also the main functions of your VCR or DVD. Switch on the device you want to operate and
6next press this button repeatedly to select the VCR, TV or DVD. A green light will be momentarily lit to indicate the chosen function.
7Before the first time you want to control a DVD or VCR by using this
8remote control, you have to set it up depending on the brand of the
9device to be used. For more details, refer to chapter “Remote Control Configuration for VCR or DVD” on page 23.
!º
!¡
| 5 Selecting channels: |
!™ | If Media Selector is switched to TV or VCR, press this button to select |
| channels. |
| For |
!£ | seconds. |
|
7Selecting screen format: Press this button repeatedly to change the format of the screen. For more details refer to chapter “Auto Format” on page 12.
8This button only works in Teletext mode.
9Selecting Teletext: Press this button to switch on teletext.
!º Joystick:
a) If Media Selector is switched to TV:
•When MENU is switched on, use these buttons to operate the menu system. For details refer to “Introducing and Using the Menu System” on page 10.
•When MENU is switched off, press OK to
show a channel overview. Then press or to select the channel and then press again
the OK button to watch the selected channel.
b)If Media Selector is switched to VCR or DVD:
Using these buttons you can control the main functions of your VCR or DVD.
!¡ Displaying the menu system: Press this button to display the menu on the TV screen. Press again to remove the menu display from the TV screen.
!™ Selecting channels: Press these buttons to select the next or previous broadcast channel.
!£ NexTView: For more details refer to chapter “NexTView” on page 19.
GB
!¢ Adjusting TV volume: Press these buttons to adjust the volume of the TV.
!∞ Recording button: If Media Selector is switched to VCR, press this button to record programmes.
!§ Selecting TV mode: Press this button to switch off PIP, teletext or video input.
!¶ Selecting Picture mode: Press this button repeatedly to change the picture mode.
!• Selecting Sound effect: Press this button repeatedly to change the sound effect.
!ª Displaying on Screen information: Press this button to display all
@º Freezing the picture: Press this button to freeze the picture. The screen is divided into two screens. On the left with the normal picture, on the right the picture is freezed. Press this button again to return to the normal picture.
@¡ Swapping screens: Whilst you are in “PIP” mode, press this button to swap the two screens.
@™ PIP (Picture in Picture): Press this button to watch another source in a small picture (PIP) within the main TV picture. Press again to cancel. To select the source you want to watch, refer to the chapter “PIP Input” on page 13.
@£ Muting the Sound: Press this button to mute TV sound. Press again to restore the sound.
Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details, please refer to “Teletext” section on page 18.
Overview 5