34
SETUP SETUP SETUPSETUP SetupSETUP

DVD Player with

S VIDEO and Audio

Connectors

Use this connection if your DVD player does not have component

video (Y, PB, PR) jacks.
To connect a DVD player with A/V connectors
1Use an audio cable to connect the DVD players audio output

jacks to the TVs audio input j acks.

2Use an S VIDEO cable to connect the DVD players S VIDEO jack

to the TVs S VIDEO jack.

Notes on Using This Connection
To Do This ... Do This ...
Watch the DVD player Press TV/VIDEO repeatedly to select the DVD input (VIDEO 1 in the
illustration).
Set up the TV remote control
to operate the DVD player
If you have a non-Sony DVD player, you must program the remote control.
See Programming the Remote Control on pages43-44.
Activate the TV remote
control to operate the DVD
player
Set the A/V slide switch to th e position you programmed fo r the DVD
player. Then press VCR/DVD FUNCTION.
Control DVD functions with
the TV remote control
See Operating a DVD Player on page59.
Label video inputs to easily
identify equipment connected
to the TV
See the instructions for setting up Video Labels on pages 72-73.
Audio cable
S VIDEO
cable
TV
DVD player
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.