Sony KV-32HS500 38, Setting Up the Channel List,

38
SETUP SETUP SETUPSETUP SetupSETUP
Setting Up the Channel List
After you finish connecting your TV, you need to run Auto Setup to
set up your channels. The Auto Setup screen appears when you turn
on your TV for the first time after hooking it up. If you do not want to
set up the channels at this time, you can do it later by selecting the
Auto Program option in the Channel Menu (see p age 66).
Using Auto Setup 1Press POWER to turn on the TV.
2Press TV FUNCTION on the remote control.
3To continue running Auto Setup, press CH+. To exit Auto Setup,
press CH-.
Auto Setup auto matically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
To reset the TV to factory settings
1Press POWER to turn on the TV.
2Hold down RESET on th e remote control.
3Press TV POWER on the TV. (The TV will turn itself off, then back
on.)
4Release RESET.
✍The Auto Setup feature does not apply for installations that use a cable box
for all channel selection.