Panasonic SC-THB880 owner manual Setup menu

Setup menu

Press [SETUP] repeatedly to select the setup item.

Press [3, 4] repeatedly to select the desired setting and then press [OK].

	Dims the display after
DIMMER	5 seconds of inactivity.
	ON
	OFF
	The main unit is
AUTO	automatically turned off if
	there is no audio input and
POWER	when you do not use it for
DOWN	approximately 20 minutes.
	ON
	OFF
	Sets the volume limit to 50
	when you turn on the main
VOL	unit although the volume is
	set to above 50 before it is
LIMITATION
	turned off.
	ON
	OFF
	This function allows you to
	connect a paired
	Bluetooth® device when
	the main unit is in standby
BLUETOOTH	mode.
	ON
STANDBY
	OFF
	The main unit will be
	turned on automatically
	when you connect a paired
	Bluetooth® device.

	Change the Bluetooth®
	connection link mode to
	suit the connection type.
	Make sure that the
LINK	Bluetooth® device is not
	connected (“PAIRING” or
MODE	“BLUETOOTH READY” is
	indicated on the display).
	MODE 1: Emphasis on
	connectivity.
	MODE 2: Emphasis on
	sound quality.
	Turn on the VIERA Link
	function.
	ON
	OFF
	Select “OFF” when your
VIERA	HDAVI Control device does
	not work correctly with this
LINK	system. ARC will be
	disabled. Connect an
	optical digital audio cable.
	Turn off all connected
	devices and then turn them
	on again after changing the
	setting.
	Select the appropriate
	speaker placement mode
	to suit your placement
	method. This system will
	adjust the sound effect
	according to the placement
	mode setting.
SPEAKER	ON TABLE-AUTO or ON
PLACEMENT	WALL-AUTO: Setting will
	be automatically changed
	depending on the
	placement method.
	ON TABLE: For table top
	layout
	ON WALL: For wall
	mounting layout

≥The default setting is underlined. Changed settings will be kept until it is changed again, unless otherwise indicated.

24 RQT9903